http://www.paperterrain.com/forum/topic/painting-the-inside-of-micro-scale-ruins A Place to Meet and Discuss PaperTerrain en-US Sun, 05 Sep 2010 06:22:04 +0000 http://bbpress.org/?v=1.0.2 q http://www.paperterrain.com/forum/search.php http://www.paperterrain.com/forum/topic/painting-the-inside-of-micro-scale-ruins#post-6 Wed, 14 Oct 2009 21:56:29 +0000 scottwashburn 6@http://www.paperterrain.com/forum/ <p>For most of my PaperTerrain models I have a printed 'burned-out' pattern that goes on the reverse side of the building ruins. But back-printing the sheets is time-consuming and expensive, so I don't do that on my micro-scale models to keep the price down. I know a lot of people paint the inside of the ruins so they aren't a gleaming white. Well, an easy way to do this (which avoids the danger of getting paint where you don't want it) is to paint the back of the ruins BEFORE you cut them out. Just take the sheets so the blank (reverse) side is facing you and hold it up to the light. You'll be able to see through the sheet and see where the ruins are. Just take a broad brush and some brown or black or gray paint and slop the paint right on them. Set them aside to dry and then you can cut them out and build the models as normal. A great time-saver. </p>